Re: bugs in the layout

[Scott A Smiley <sc.smiley@juno.com>]

Was it in all racks or just in track 4?  What if we were plugged into the
jumper plug and not the power plug on the face of the module.  I do not
think that it is supposed to matter but maybe?    The jumper plug and the
power plug should be the same, 4 powers and 2 ground wires.  I guess we
could look at how they are wired into the module as well as the ground
ion the power box.

Scott

On Mon, 3 Nov 2003 09:47:56 -0600 "Steve Wise" <swise@aoot.com> writes:
> 
> Yesterday we experienced TMCC reception problems.  I think our 
> command base
> isn't getting a good signal to our outer rails.  I hooked up a 
> direct link from
> the command base to track 4 outer rail using allicator clips and the 
> problem
> went away. (this patch job is still in place)  I suggest we explore 
> this before
> our next run and ensure that the wire from the command base into the 
> ground
> wires is good...
> 
> Also my transformer for my siding modules is flakey.  It has an 
> intermittent
> short problem inside the transformer.  Please do NOT run it until I 
> fix this.
> I'll get a new transformer before our next get-together...
> 
> 
> ------
> TTAT members reflector.
> 
> 

________________________________________________________________
The best thing to hit the internet in years - Juno SpeedBand!
Surf the web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!