[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fwd: Re: Layout for AMRE Fall Train Show



Yesterday I was advised by AMRE that we would probably have enough space for spectators to walk around all 4 sides. I will probably not be able to make the setup and hope I can be there by 12:00 Saturday. I will be there for Sunday and the teardown.

-------- Original Message --------
Subject: Re: Layout for AMRE Fall Train Show
Date: Thu, 30 Sep 2010 09:39:43 -0500
From: John Eagle <jheagle@texas.net>
Reply-To: ttat-members@aoot.com
To: ttat-members@aoot.com


I am fairly sure we will be in the corner with two walls and will see if I can get specifics.

On 9/30/2010 9:27 AM, Bill Lohman wrote:
AANLkTikWW8Xo9RL+TcNDvzL1SuME8Hjns0EWLcCN9KuX@mail.gmail.com" type="cite">
P.S. Does anyone know if we are in a corner, against the back wall or whatever?   I'm assuming that if we're in the back corner or against one wall we will want to orient the layout so that the yard is on the "wall" side (not against the wall if we can help it) which will put the trolley side in the best possible viewing positions.  Correct? 
 
On Tuesday Rick told me he's bringing his bridge module. Where does it go?
 
Bill


On Thu, Sep 30, 2010 at 6:40 AM, Ira Schneider <ira_schneider@iname.com> wrote:
Hi,

I revised the layout for this weekend's show.  Attached is the new layout.
As usual, the planned layout is only a guideline.  It may change again
when we get to Live Oak.

I will get to Live Oak as early as possible.  If the trailer is there before I am,
you can start unloading the modules (all modules in the trailer are being
used except E1, E4, and the Entry (Passthru).

I got my scanner working again, so this copy should be more legible than the
previous one.




Ira