Hey Scott,
Just wondering: Is there a particular reason why we don't just use the email list to develop the idea, work out the kinks, come up with an action plan and get it all done electronically? Why a separate "committee" to do this off-line in the dark?
Stevo.
scott a smiley wrote:
> No , I think it is a great offer. I just do not want to get expectations up and a project started without fully understanding the implications. I believe a committee will be formed to analyze the proposition. Adrian will be looking for contributors. I look forward to seeing the plan.
> Scott
> On Fri, 5 Jun 2009 12:01:30 -0500 Bill Lohman <
844bill@gmail.com <mailto:
844bill@gmail.com>> writes:
>
> Scott, so what's up with the sophomoric words about "thinking and
> planning" -- in response to a simple straightforward offer to
> donate materials to the club IF the club can use them.
> Think WE all just fell off the back of a trunip truck or
> something? Bill
>
> On Thu, Jun 4, 2009 at 11:10 PM, scott a smiley
> <
sc.smiley@juno.com <mailto:
sc.smiley@juno.com>> wrote:
>
> One of the best things about thinking and planning is that it
> does not
> cost anything until we know it will work and be beneficial..
> Thanks for
> the offers Bill. Home Depot Arbor walk has some cut 3/4'"
> plywood for $2
> that might also be good. In their scrap bin.
>
> Scott
>
> On Thu, 4 Jun 2009 09:44:57 -0500 Bill Lohman
> <
844bill@gmail.com <mailto:
844bill@gmail.com>> writes:
> > I agree with Adrian and Steve. It would be extremely useful
> during
> > setup
> > and teardown. And would give us a more user friendly and better
> > defined
> > entrance/exit during the show hours. Bet it would save valuable
> > time during
> > setup -- and some aching backs on us geezers.
> >
>
> I have three each 28" wide by 4 feet long sections of 1/2 inch
> > plywood left
> > over from building the 45 degree corners. Also enough "already
> > ripped to
> > club size" 1 by 3's eight feet long to build three standard
> linear
> > modules. And all the wire and jones plugs we would need. And I
> > still have
> > a half gallon of "club approved" green paint. And I have
> enough foam
> > roadbed
>
> like we used on the 45 degree corners to do a 4 or 5 track
> linear 4
> > ft
> > module. And I can spare 4 ft of velco roll which I recently
> > purchased for
> > other projects.
> >
> > If the approved design would work out so we can use this
> material,
> > I'll
> > gladly donate it to the club. All we would need is track and
> > pocket
> > hardware at the
club's expense. And maybe some other items
> needed
> > to do a
> > nifty job on the lift out. Bet we could build it for under $100
> > plus track=
> ____________________________________________________________
> Criminal Lawyers - Click here.
>
http://thirdpartyoffers.juno.com/TGL2141/fc/BLSrjpTOVoLKNZFzdDRNQKyLPDfnh9penlrl2pUPSxeEKnGeY8h4VvOlcSc/> ------
> TTAT members reflector.
>
>
>
------
TTAT members reflector.