[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: L-Shaped Layout Using Four New Corners
I agree fully. thanks for checking it out.. what we need to remember is
tat the two old corners go on opposite sides on the outside of the L it
looks to me.
Scott
On Sat, 15 Dec 2007 23:21:53 -0600 "Ira Schneider"
<ira_schneider@Iname.com> writes:
> Scott,
>
> I measured the original corners and Ed's previous set of corners
> when we first started using them.
> Attached is a copy of my original measurements. Corners C1, C2, C3,
> and C4 are the old
> corners. Corners C5 and C6 are the first set of Ed's new corners.
> C7 and C8 (which I didn't
> measure) are the new corners which Ed and you built.
>
> Corners C5 and C6 measured as 56-3/4" squares. I also measured from
> each track to the edge of the
> square. The dimensions on the diagrams reflect these measurements.
>
> The old corners were 53-1/2" squares.
>
> According to my original measurements, the new corners are 3-1/4"
> larger than the old corners. I don't
> think the 1" discrepancy between your measurements and mine will
> make any difference in setting up
> the layout.
>
> The dimensions I used on the L-shaped layout sketches came from my
> original measurements.
>
> I only measured one corner from each group, assuming that all
> corners from that group were the
> same size. (i.e. I measured one of the C1, C2, C3, and C4 corners
> and one of the C5 and C6 corners.)
>
> In any event, I think the L-shaped layout will work.
>
>
> Ira
>
>