Re: Work Day

[Scott A Smiley <sc.smiley@juno.com>]

WE will be getting some more of the new members to upgrade modules.  They
will need this track, 4 per module.  I think we may have 6 to 8 to do
which your supply should be enough for them if we are the primary
purchaser of this track.  Maybe on the workday, we will make the layout a
little smaller so some of the modules can go home with members.  Thanks
for the notice Craig.  

What we really need on the short term is the new corner curve tracks.  I
will see if Ed can furnish you a list of what we need.

Scott

On Sat, 25 Feb 2006 23:38:19 -0600 "Craig Berry"
<craig@collectiblecaboose.com> writes:
> So you know, for the time being, I can still get K-Line Shadowrail 
> 40"
> pieces.  I have 6 in stock, I have ordered another 25 pieces.  If 
> you
> think I need to have more, tell me so that I can get it while I 
> still
> can.  Oh, and I'm referring to the regular ShadowRail track, not 
> the
> SuperSnap track.  That is available too, for now....
> 
>  
> Craig Berry
> The Collectible Caboose
> store: (512) 259-9494
> mobile: (512) 657-3128
> 
> 
> -----Original Message-----
> From: ttat-members-owner@aoot.com 
> [mailto:ttat-members-owner@aoot.com]
> On Behalf Of Scott A Smiley
> Sent: Saturday, February 25, 2006 10:33 PM
> To: ttat-members@aoot.com
> Subject: Work Day
> 
> 
> Instead of running trains all day next Sat. we are going to have a
> layout work day.  WE have some track and power repairs that need to 
> be
> made to
> the layout.   Since we have work do to I decided to start at 10:00 
> so we
> have plenty of time to get it all done and back together and still 
> some
> time to test the layout.
> 
> Things to do:
> Fix ground wiring on main power connections.
> Wire new corner connection power plug.
> Replace some damaged track
> Replace some sectional track, and RCS on tract 2.
> Check corner wiring to make sure full power is provided throught he
> crass layout extension cord.
> 
> 
> In order to do these things we will need:
>  some soldering guns or irons.
> Cordless drills with screw bits
> solder 
> wire stripers
> straight edges
> squares preferable the adjustable type
> tape measures.
> 
> I will attempt to have the supplies that are needed.  WE will not 
> be
> working on the trailer since the board decided to buy a new trailer 
> this
> spring.  We. will need additional work days to get it ready.  
> 
> See you Sat.  if we get an early start and work efficiently we 
> should
> have some time to run trains so bring them with you as well as the 
> tools
> above.
> 
> Scott
> ------
> TTAT members reflector.
> 
> ------
> TTAT members reflector.
> 
>