Re: Tearing down the layout at The RailYard

["Ron Fiebelkorn" <rwf49@hotmail.com>]

Just a quick reminder to everyone who has not updated the event document for 
the SAMRA Show.

Please indicate as soon as you can whether or not you can attend this event. 
  Currently only a couple of members have indicated that they will be able 
to go to SAMRA.  If no one else indicates that they plan on going to this 
event within the next week we may need to contact SAMRA and let them know 
that we will have to cancel.

Thanks--Ron

>From: "Ron Fiebelkorn" <rwf49@hotmail.com>
>Reply-To: ttat-members@aoot.com
>To: ttat-members@aoot.com
>Subject: Re: Tearing down the layout at The RailYard
>Date: Thu, 22 Dec 2005 21:03:40 +0000
>
>I talked with Paul Lawler from SAMRA this afternoon and received some 
>additional information about the show.  I updated the event document with 
>this information.
>
>We now have a 40 x 40 area to work with and need to decide what our layout  
>will look like by January 12.  SAMRA needs to give a final floor plan to 
>the Convention Center Staff at that time.  So if we need to work on the 
>corner modules will need to do it soon.  We'll also need to decide how many 
>modules can go into the trailer and what additional scenery modules will be 
>used.
>
>Please update the event document with your information as soon as you can.  
>Right now Ed is the only one signed up for the show so if no one else is 
>going we'll let him decide how big of a layout he wants to set up.
>
>Happy Holidays to Everyone--Ron
>
>
>>From: Scott A Smiley <sc.smiley@juno.com>
>>Reply-To: ttat-members@aoot.com
>>To: ttat-members@aoot.com
>>Subject: Re: Tearing down the layout at The RailYard
>>Date: Wed, 21 Dec 2005 22:47:18 -0600
>>
>>I would plan on bringing some replacement track for the corners if
>>needed.  They have all 072 curves for A thru D and 054 for E.    one
>>piece of 072 is cut so I hope that one is not bad, making that track 66".
>>  I have 072s that could be used as necessary.  I remember some severe
>>track damage.  I guess it would also require a soldering iron to
>>completely change the track.   This could all be done at the railyad if
>>we took the time.
>>
>>Scott
>>
>>On Wed, 21 Dec 2005 11:12:04 -0600 "Ira Schneider"
>><ira_schneider@Iname.com> writes:
>> > Ron,
>> >
>> > Last year we had a 7 x 7 L-shaped layout at SAMRA.  That was
>> > approximately 37' x 37'
>> > without bollards.
>> >
>> > Last year, they specifically asked us for a 40' x 40' L-shaped
>> > layout.  It allowed them to
>> > have some dealer's tables closer to us (in the cutout portion of the
>> > L).  I suspect they
>> > want to do the same this year.
>> >
>> > I don't know whether or not all six corner modules are still
>> > useable.  We have only been
>> > using four of them at The RailYard - the other two modules are in
>> > the trailer.  We are
>> > using the two newer corners and the two old corners with the power
>> > connectors.
>> > I think the Swamp module is in bad shape (but may still be useable).
>> >  I don't remember
>> > what problems there were with the fourth old corner module.
>> >
>> > We really need the club to finish constructing the two new modules
>> > which Ed has so we
>> > have six viable corners.
>> >
>> >
>> > Ira
>> >
>> >
>> >
>> > ------
>> > TTAT members reflector.
>> >
>> >
>>------
>>TTAT members reflector.
>
>
>------
>TTAT members reflector.