Re: Tearing down the layout at The RailYard

[Scott A Smiley <sc.smiley@juno.com>]

I would plan on bringing some replacement track for the corners if
needed.  They have all 072 curves for A thru D and 054 for E.    one
piece of 072 is cut so I hope that one is not bad, making that track 66".
 I have 072s that could be used as necessary.  I remember some severe
track damage.  I guess it would also require a soldering iron to
completely change the track.   This could all be done at the railyad if
we took the time.

Scott
 
On Wed, 21 Dec 2005 11:12:04 -0600 "Ira Schneider"
<ira_schneider@Iname.com> writes:
> Ron,
> 
> Last year we had a 7 x 7 L-shaped layout at SAMRA.  That was 
> approximately 37' x 37'
> without bollards.
> 
> Last year, they specifically asked us for a 40' x 40' L-shaped 
> layout.  It allowed them to
> have some dealer's tables closer to us (in the cutout portion of the 
> L).  I suspect they
> want to do the same this year.
> 
> I don't know whether or not all six corner modules are still 
> useable.  We have only been
> using four of them at The RailYard - the other two modules are in 
> the trailer.  We are
> using the two newer corners and the two old corners with the power 
> connectors.
> I think the Swamp module is in bad shape (but may still be useable). 
>  I don't remember
> what problems there were with the fourth old corner module.
> 
> We really need the club to finish constructing the two new modules 
> which Ed has so we
> have six viable corners.
> 
> 
> Ira
> 
> 
> 
> ------
> TTAT members reflector.
> 
>