RE: Discussion item

[Adrian Elliott <aelliott@jump.net>]

Correction,

MTH TIU should remain on track 2.  Sorry about that.


Adrian...




-----Original Message-----
From: ttat-members-owner@aoot.com [mailto:ttat-members-owner@aoot.com]On
Behalf Of Adrian Elliott
Sent: Sunday, January 26, 2003 9:22 PM
To: ttat-members@aoot.com
Subject: RE: Discussion item


Hello all,

My thoughts, however they may be......

1. More power, mmmmmm good!
2. Agree, tracks 1 and 2 should get it first.
3. MTH TIU should probably remain on track 1.
4. RE the halt button thing:

The sc2 is basically 4 SPDT relays???  Is there any way to wire it between
the TIU and track and program it to trip one of the relays on the Halt
command thus cutting power to the track??  If not how about a Basic Stamp to
do the same thing or some type of electronic circuit driving a relay that
would respond to the halt command.

Or, the ugly way,  how about another powermaster, say track 6, set to
command mode so 18V all the time.  Power wouldn't go to a track but just to
the coil of a relay so........., when the halt is pressed the track 6
powermaster would cut power to track 6 (really the coil on the relay), the
coil deenergizes, contacts open, power stops flowing to track 2.


Adrian...