If I read the label's correctly, here's what they have at Lowe's on Stassney & IH35. Someone my want to double check my figures. 24x48x.250 = $31.37. In my opion the thickness is more than what we need and it was pretty heavy. 24x48x.125 = $18.58 but they only had it in a bronze finish/not clear. 24x48x.093 (3/32) = $23.16 - I think this is what I bought last year. Ron >From: Adrian Elliott <aelliott@jump.net> >Reply-To: ttat-members@aoot.com >To: ttat-members@aoot.com >Subject: Re: Plexiglass on the corners >Date: Thu, 07 Mar 2002 11:52:18 -0600 > _________________________________________________________________ Chat with friends online, try MSN Messenger: http://messenger.msn.com
--- Begin Message ---Good point. That puts it into perspective. Plexiglas is cheap compared to the price of a new engine. I don't think 1/8" is to thin but we could get a test piece to try it out. How much is the Plexiglas at Home Depot/Lowes?
- To: ttat-members@aoot.com
- Subject: Re: Plexiglass on the corners
- From: Adrian Elliott <aelliott@jump.net>
- Date: Thu, 07 Mar 2002 11:52:18 -0600
- References: <20020306.194848.-16702903.1.sc.smiley@juno.com> <002301c1c5e5$49830330$17481ed8@haggard>
- Reply-to: ttat-members@aoot.com
- Sender: ttat-members-owner@aoot.com
$128.00 split up by 16 active members is only $8.00 a person. I would be willing to donate $8.00, $16.00, or heck, $20.00 to the plexiglas project to get it done. A little money very well spent in my opinion.
Steve Wise wrote:
I found a place on the internet that sells custom cut plexiglass. An 8"------ TTAT members reflector. --- End Message ---
tall by 32" wide piece is $8.00. We'd need 3 for each corner, that's $24.
times 4 = $96.
Plus 4 more maybe for the siding areas? $32Total $128 plus shipping.
Doesn't sound that expensive to save my $1000 train.
Is 1/8" too thin? If it's only 6" above the module, I would think 1/8"
might be stable enough if they're joined by ron's white thingies he found at
Lowes.Or do we need 1/4?
----- Original Message -----
From: "Scott A Smiley" <sc.smiley@juno.com>
To: <ttat-members@aoot.com>
Sent: Wednesday, March 06, 2002 7:31 PM
Subject: Re: Plexiglass on the corners> The rope is like a guard rail. I think kids will pull on it and it will
> break. I think there may be less expensive plastic sheets but will have
> to look around. Let's keep thinking.
>
> Scott
>
> On Wed, 06 Mar 2002 14:55:30 +0000 "Ron Fiebelkorn" <rwf49@hotmail.com>
> writes:
> > I played around with the plexiglass for a while and had sort of a
> > prototype
> > module set up for it. I think its still in the trailer. It has a
> > piece of
> > molding on the front and the molding extends out from the front of
> > the
> > module a 1/4" or less so the plexiglass can be dropped into place.
> > The
> > plexiglass had a quite a bit of play in it when it was in place on
> > the
> > module but since then I've found a piece of white flexible plastic
> > ??? at
> > Lowe's that has a grove in it the same size as the plexiglass. This
> > white
> > piece of ??? can be placed on the top of two pieces of plexiglass
> > where the
> > meet, and will probably keep everything in place pretty well. The
> > only
> > problem I see with the plexiglass is the cost of the plexiglass and
> > the cost
> > of the velcro (if it has to be replaced). Its been a while but I
> > think the
> > plexiglass cost about $24.00 for a 18" x 48" piece. I have three 6"
> > x 48"
> > pieces somewhere.
> >
> > I also have another idea to keep the trains from falling to the
> > floor.
> >
> > Take two dowels approximately 6" in length and attach them to each
> > end of
> > the module by possibly drilling two holes into the top of the
> > module. Then
> > drill 2 or 3 holes in the dowels and run a small rope or some other
> > device
> > between the two dowels. The rope could be knotted on each end so it
> > doesn't
> > slide through the holes in the dowels.
> >
> > I haven't tried this but it seems like the cost would be cheap, the
> > curtains
> > would not have to be shortened, the rope won't scratch like the
> > plexiglass,
> > it probably would be easy to take up or down, and it would keep the
> > trains
> > from falling to the floor.
> >
> > Any comments?
> >
> > Ron
> >
>
> ________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today! For your FREE software, visit:
> http://dl.www.juno.com/get/web/.
> ------
> TTAT members reflector.
>------
TTAT members reflector.