I have set up a track layout using a set of 1122 switches that are cross-wired to alternate between two loops. As the train passes over the master switch it simultaneously resets the slave switch to the alternate loop. This works great on the long outside loop and when the train length is less than the distance between the two inner loop switch points. However, in that the two switches activate simultaneously, the slave switch moves to the outside loop as the train passes over the master switch while in the inner loop, thus derailing the train which is still passing over the slave switch. Is there some way to either keep the slave switch from activating while the train is still on it? I've tried switching wires around, but it either works as it is wired, or not at all. Is there some way to jumper something?