Re: Fwd: New Braunfels Model RailroadJamboree - 2010

[Steve Wise <swise@aoot.com>]

Do we still figure 10 feet for a pair of corners?  So 26 x 34 == roughly 
4 modules x 6 modules?


dwayneg57@aol.com wrote:
> See email below.  Our space for the New Braunfels show will be the 
> same as last year.  Per Jerry, it will be 26 x 34 feet.  I will update 
> the participation document.
>  
> Thanks,
>  
> David
>
>
>
>
>
> -----Original Message-----
> From: Gerald Garteiser <jerryg@gvtc.com>
> To: dwayneg57@aol.com
> Sent: Fri, Feb 12, 2010 9:33 am
> Subject: RE: New Braunfels Model RailroadJamboree - 2010
>
> David:  Last year we started you out with 30 ft. x 34 ft.    The fire 
> code required a 6 ft. aisle and we had only 2+ feet, so had to take 
> off 4 feet.  The final layout at showtime was approximately 26 feet x 
> 34 feet.    You will be in the same spot this year, so your layout 
> will need to stay within that 26 feet x 34 feet dimension.
>  
> Regards,  Jerry Garteiser
>  
> *From:* dwayneg57@aol.com <mailto:dwayneg57@aol.com> 
> [mailto:dwayneg57@aol.com <mailto:dwayneg57@aol.com?>]
> *Sent:* Thursday, February 11, 2010 10:37 PM
> *To:* jerryg@gvtc.com <mailto:jerryg@gvtc.com>
> *Subject:* New Braunfels Model RailroadJamboree - 2010
>  
> Jerry,
>  
> I am a board member for the Austin Tinplate Trackers and have been 
> asked to get a confirmation on the size of the layout we will be 
> allowed to set up at the show.  I believe we are allowed 34 by 40 feet 
> but wanted to verify.  Last year we had to reduce the size by 4 feet 
> due to a fire code issue.  Wanted to plan our set up for the show so 
> wanted to be sure.
>  
> Thanks
>  
> David Gold
> TTAT Board Member