|
Hey guys. Just a quick question. Can someone
with a newer tmcc diesel handy check to see if you have continuity between the
pickups? My new rs-3 was acting weird, and I determined that one of
the truck pickups was not working right. Symptoms were randomly opening
couplers, and dying on o22 switches. If I place a piece of paper between one
pickup and the track, the engine gets no power from the other pickup. Bad
board? The wire from the pickup is hot right up to the board
connection. This engine worked with no issues the last time I ran
it. Then today, I took it out of the box and put it on the track, and this
happens from the get go. Thanks, mike |