On Thu, 4 Jun 2009 09:44:57 -0500 Bill Lohman <
844bill@gmail.com> writes:
> I
agree with Adrian and Steve. It would be extremely useful
during
> setup
> and teardown. And would give us a more
user friendly and better
> defined
> entrance/exit during the
show hours. Bet it would save valuable
> time during
>
setup -- and some aching backs on us geezers.
>
> I have three
each 28" wide by 4 feet long sections of 1/2 inch
> plywood
left
> over from building the 45 degree corners. Also enough
"already
> ripped to
> club size" 1 by 3's eight feet long
to build three standard linear
> modules. And all the wire and
jones plugs we would need. And I
> still have
> a half
gallon of "club approved" green paint. And I have enough foam
>
roadbed
> like we used on the 45 degree corners to do a 4 or 5 track
linear 4
> ft
> module. And I can spare 4 ft of velco
roll which I recently
> purchased for
> other
projects.
>
> If the approved design would work out so we can
use this material,
> I'll
> gladly donate it to the club.
All we would need is track and
> pocket
> hardware at the
club's expense. And maybe some other items needed
> to do
a
> nifty job on the lift out. Bet we could build it for under
$100