Work Day

[Scott A Smiley <sc.smiley@juno.com>]

WE had about 7 attend for work and one other club member today.  WE got a
lot done but it is hard to see what we accomplished.
We got the rewiring of the ground connections done on three corners,
wried in the power plugs in the two new corners, added additional ground
from the transformer box and wired in the power connector on one corner.
WE replaced the sectional track on two modules.  Filled in the track gaps
on three transition modules.
Fixed some leg pockets, added and fixed Velcro around the layout as
needed.

We got it all back together about 4 and ran trains until after 5.  It all
seemed to work first try so that is the first test.
The MTH signal strength stayed about 7 to 8 around the layout so I think
that is a big improvement.  WE found some loose wires on track 2 and some
other locations.  Voltage seemed to be more constant but when we get some
multi motor engines and passenger trains on we will see if this all
helped the power uniformity.

Any others that attended add what I missed.

Scott