Re: Work Day

["Steve Wise" <swise@aoot.com>]

Hi Tinplaters:

Scott, Rick, and Stevo attended the work day.

Accomplishments:

- new shelf in trailer.  This shelf is above the transition modules on the
left side.  It will hold the 2' trolly modules, plus there's room for
general storage.

- plexiglass on one more corner (other small club corner).  We need more
supplies to complete the other two club corners.

- fixed leg slots on one of the new corners and started on the 2nd (we
quickly overheated in the august sun :-).  Rick came up with the idea of
just rasping them with a wood rasp.  This worked well to make them larger.
Since they were glued together, it would be painful to remove them and
remake them.  The rasping did the trick!

- added spacers on the new corners so they don't crush track when strapped
into the trailer. The problem is the cross members at each end of the
"square part" of the corner modules are not recessed.  So when stacked, the
would press on the track of the corner module underneath.  We added some
small 1x2 spacers to force this gap.  It didn't exactly work due to some
alignment miscalculations, so we still need some minor tweaking on this.


Stevo.


----- Original Message -----
From: "Scott A Smiley" <sc.smiley@juno.com>
To: <ttat-members@aoot.com>
Sent: Sunday, August 04, 2002 10:40 PM
Subject: Work Day


> I need a tally of those planning on attending the work day.  I am
> planning on getting the Trailer Fri. PM so we will work at my house.  WE
> can start at 9 or earlier and hope to be done by 2.  Bring some drinks.
> I will work on something to eat.
>
> Items to work on
>
> New shelf in trailer
> Cradle for corners
> Finish new corners
> Reflective tape on trailer
> Add Plexiglass holders to corners and switch modules
>
>
> I do not remember what is needed for the Plexiglass.  Someone let me know
> and tell me if we already have some of the material?  Do we need plugs
> for the corners or does someone have them already?  I have some 1 by so
> can rework the leg sockets.
>
> i will tighten up the program as I see who is coming and what materials
> we already have.
>
> Scott
>
> ________________________________________________________________
> GET INTERNET ACCESS FROM JUNO!
> Juno offers FREE or PREMIUM Internet access for less!
> Join Juno today!  For your FREE software, visit:
> http://dl.www.juno.com/get/web/.
> ------
> TTAT members reflector.
>