[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fwd: Trailer Towing




---------- Forwarded message ----------
From: <rbd3985@aol.com>
Date: Mon, Sep 29, 2014 at 9:50 PM
Subject: Trailer Towing
To: ttat-members@aoot.com


If Scott can pull the club trailer with his suburban it and Ed has pulled it with his truck I would think Phil's new truck could pull it as well.

No one else has said they could pull it to San Antonio. At this point we may have to cancel.

Ricky





-----Original Message-----
From: Ed Weltens <ed.weltens@sbcglobal.net>
To: ttat-members <ttat-members@aoot.com>
Sent: Mon, Sep 29, 2014 8:31 pm
Subject: RE: Tinplate Trackers of Austin Texas - Exhibitor Registration (Layout)

Yes, the trailer is in the heavy duty range for tongue weight now. I can tow 9000 lbs but only 500lbs tongue weight.   I could probably go a little heavier with stiffer tires. Scott was looking into a weight distributing hitch to get some of the weight off the hitch but I don't know what he found. 

Ed




Sent via the Samsung Galaxy Note® 8.0, an AT&T 4G LTE tablet



-------- Original message --------
From: Phil Huffstatler <phil@philhuffstatler.com>
Date: 09/29/2014 4:38 PM (GMT-06:00)
To: ttat-members@aoot.com
Subject: RE: Tinplate Trackers of Austin Texas - Exhibitor Registration (Layout)


Arghh…
 
Max tongue weight on mine is 1130 at the receiver, though I can supposedly tow up to 7700 lbs.
That’s the “Max” towing package on ½ ton trucks from them.
 
Maybe I should have bought a bigger truck? L
With that 1500 lb. tongue weight, that definitely says ¾ ton or better.
 
Sorry sirs.
Phil
 
 
 
From: ttat-members-owner@aoot.com [mailto:ttat-members-owner@aoot.com] On Behalf Of rbd3985@aol.com
Sent: Monday, September 29, 2014 4:05 PM
To: ttat-members@aoot.com
Subject: Re: Tinplate Trackers of Austin Texas - Exhibitor Registration (Layout)
 
I believe Scott said the tongue weight was 1500 lbs and the total weight was 6000lbs. It is a tandem axle 7x14 and has brakes. Scott and Russell can tell you more as they have pulled it many times.

Ricky
 
 
 
-----Original Message-----
From: Phil Huffstatler <
phil@philhuffstatler.com>
To: ttat-members <
ttat-members@aoot.com>
Sent: Mon, Sep 29, 2014 4:28 am
Subject: RE: Tinplate Trackers of Austin Texas - Exhibitor Registration (Layout)
I may be able to pull the trailer. However, besides needing a 2-5/16 ball, I don’t know the overall trailer tongue weight, weight, length, preferred tongue height, etc.
 
Just took delivery of a new Ford F150 4x4 truck last Saturday, and I wanted to make sure I wouldn’t overload it before offering.
 
Let me know,

Phil Huffstatler
 
 
 
From: ttat-members-owner@aoot.com [mailto:ttat-members-owner@aoot.com] On Behalf Of Paul Calmes
Sent: Sunday, September 28, 2014 1:11 PM
To:
ttat-members@aoot.com
Subject: FW: Tinplate Trackers of Austin Texas - Exhibitor Registration (Layout)
 
Need more folks for Friday set up and someone to pull the trailer!
 
·         3201 E Houston St, San Antonio, TX 78219
·         The "San Antonio Train Show," AMRE this coming weekend Oct 3-5.

 
Paul Calmes
 
From: Ron Sandoval [mailto:2014SanAntonioTrainShow@satx.rr.com]
Sent: Sunday, September 28, 2014 11:48 AM
To: 'Paul & Gayle'
Subject: RE: Tinplate Trackers of Austin Texas - Exhibitor Registration (Layout)
 
Paul,
 
As discussed earlier, we are planning on a 52 X 35 layout from your club.
 
Thanks again…..see you all on Friday.
 
Ron
 
From: Paul & Gayle [mailto:calmes@earthlink.net]
Sent: Tuesday, July 22, 2014 9:05 PM
To:
2014SanAntonioTrainShow@satx.rr.com
Cc:
ttat-board@aoot.com; lbonin@satx.rr.com
Subject: Tinplate Trackers of Austin Texas - Exhibitor Registration (Layout)
 
Ron,
 
Here’s our registration form. I’m headed to Florida for 2 week family vacation. I’ll have email and my mobile phone available if there are any questions.  Back in Austin by August 9th.
 
I’ll create our online event coordination document around the end of August.
 
All the best,
Paul