| Work to do items 2/8/2014 |
|
|
|
|
|
|
| Priority |
Description |
Need |
|
| 1 |
Add latch to walk thru module |
latch |
|
| 1 |
Add wire hooks to modules |
hooks |
|
| 1 |
Change legs on loose modules |
wood, Tnuts, small screws, leg
leveler |
| 1 |
D1 replace guard rail in switch |
? |
|
| 1 |
Fasten bottom crates to wagon |
wire ties, bolts |
| 1 |
Fasten Hinge boards to modules where loose |
screws |
|
| 1 |
Make all legs same height on walk through |
|
|
| 1 |
Move track ends to 5" on corners with shims |
short track sections |
| 1 |
Rearrange trailer storage - corners, wide modules |
|
|
| 1 |
Reattach loose Plexiglass holders |
screws |
|
| 1 |
Reattach Velcro to module fronts |
staples |
|
| 1 |
Remove unused items from trailer |
|
|
| 1 |
Repair damaged track on modules |
track, straights, curves |
| 1 |
Repair sky board addition to Plexiglass carrier |
Angle irons |
| 1 |
Sort out tool box, remove unused items |
|
|
| 1 |
Track 3 far yard switch repair |
new motor? |
| 1 |
Vacuum trailer |
|
|
| 1 |
Y2 leg repair |
leg and adjuster |
| 2 |
Add guard rails to walk thru bridge |
|
|
| 2 |
Add hinged legs to 45 degree corners |
hinges, legs |
| 2 |
Add hinged legs to yard switch modules |
hinges, legs |
| 2 |
Add leg pockets to 90 degree corners |
old supply? |
| 2 |
Add Velcro to backs of sky boards |
heat gun |
|
| 2 |
Address issue with track 5 response |
|
|
| 2 |
Buy better dolly - add mechanism to hold modules without
sliding |
|
|
| 2 |
Check caulking on trailer roof |
caulking tube |
| 2 |
Check out controllers to confirm damaged units and
replace |
|
|
| 2 |
Clean sky boards |
|
|
| 2 |
Devise Plexiglass holder to minimize scratches |
? Cloth? |
|
| 2 |
Label modules |
|
|
| 2 |
Re organize storage for trolley modules so they are flat side
down |
|
|
| 2 |
Reduce slipping of floor mats |
|
|
| 2 |
Remove legs from 1'' yard modules and add bolts |
T nuts and bolts |
| 2 |
Sell unused club items |
|
|
| 2 |
Sort out paper boxes materials - remove un used
items |
|
|
| 2 |
Wash floor pads |
|
|
| 2 |
Wash Plexiglass |
|
|
| 3 |
Add grass and scenic modules |
grass, shrubs, earth |
| 3 |
Create Programing track, Legacy and DCS |
Interior modules? |
| 3 |
Improve transport of floor pads - hold them
together |
bag? |
|
| 3 |
Incorporate Lionel Sensor track when available |
Interior modules? |
| 3 |
Remove ground jumpers on corner modules |
|
|
| 3 |
Replace Lionel Track on modules |
track from trailer |
| 3 |
Replace tool box? |
|
|